高效液相色谱手性固定相法拆分BETTI碱及其衍生物对映体

在纤维素三（3,5-二甲基苯基氨基甲酸酯）（Chiralcel OD-H）和Pirkle型(R, R)-Whelk-O1手性柱上对手性氨基酚1-(α-氨基苄基)-2-萘酚（Betti 碱）及其衍生物1-(α-苄氨基苄基)-2-萘酚和1-(α-哌啶基苄基)-2-萘酚对映体分离进行了研究，分别考察了在正己烷流动相中，碱性添加剂、醇类添加剂的种类和浓度对手性拆分的影响。结果表明：溶质在Chiralcel OD-H柱上的分离效果好，而在(R, R)-Whelk-O1手性柱上只有1-(α-苄氨基苄基)-2-萘酚部分分离。研究了空间立体结构因素对手性分离的影响，初步探讨和比较了溶质在这2种手性柱上的手性识别机理。发现对(R, R)-Whelk-O1柱，溶质与固定相之间的吸引作用很小，而对于Chiralcel OD-H柱，溶质在手性空腔中的空间适应性很可能是手性识别的关键。     

Eco-friendly solution processing of all-polymer solar cells: Recent advances and future perspective

All-polymer solar cells (all-PSCs) exhibit great potentials in commercial applications. All-PSCs have observed steady performance gains with power conversion efficiency now reaching over 17% in the open literature. However, the current processing of all-PSCs relies predominantly on toxic, chlorinated solvents in moisture-free environments, representing a significant barrier for their commercialization due to the added costs to handle and dispose of such solvents. There is thus an urgent need for safe, environmentally benign, and sustainable ink-based processing methods to produce all-PSC devices reliably and reproducibly in ambient air. In this perspective, fundamental insights on the interplay between all-polymer blend morphologies and eco-friendly solvents are provided. Also, we discuss the recent successes of the green processing methods to manipulate the photoactive morphologies for high-efficiency all-PSCs. In the end, we provide an outlook on future challenges and opportunities of eco-friendly solvents processed all-PSCs for large-scale manufacturing.     

Uniform random colored complexes

We present here random distributions on (D + 1)‐edge‐colored, bipartite graphs with a fixed number of vertices 2p. These graphs encode D‐dimensional orientable colored complexes. We investigate the behavior of those graphs as p→∞. The techniques involved in this study also yield a Central Limit Theorem for the genus of a uniform map of order p, as p→∞.     

Simultaneous determination of 75 abuse drugs including amphetamines,benzodiazepines, cocaine,opioids, piperazines,zolpidem and metabolites in human hair samples using liquid chromatography–tandem mass spectrometry

A liquid chromatography–tandem mass spectrometric method for the simultaneous determination of 75 abuse drugs and metabolites, including 19 benzodiazepines, 19 amphetamines, two opiates, eight opioids, cocaine, lysergic acid diethylamide, zolpidem, three piperazines and 21 metabolites in human hair samples, was developed and validated. Ten‐milligram hair samples were decontaminated, pulverized using a ball mill, extracted with 1 mL of methanol spiked with 28 deuterated internal standards in an ultrasonic bath for 60 min at 50°C, and purified with Q‐sep dispersive solid‐phase extraction tubes. The purified extracts were evaporated to dryness and the residue was dissolved in 0.1 mL of 10% methanol. The 75 analytes were analyzed on an Acquity HSS T3 column using gradient elution of methanol and 0.1% formic acid and quantified in multiple reaction monitoring mode with positive electrospray ionization. Calibration curves were linear (r ≥ 0.9951) from the lower limit of quantitation (2–200 pg/mg depending on the drug) to 2000 pg/mg. The coefficients of variation and accuracy for intra‐ and inter‐assay analysis at three QC levels were 4.3–12.9% and 89.2–109.1%, respectively. The overall mean recovery ranged from 87.1 to 105.3%. This method was successfully applied to the analysis of 11 forensic hair samples obtained from drug abusers.     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

Ion pair assisted micro matrix solid phase dispersion extraction of alkaloids from medical plant

A novel micro matrix solid phase dispersion method was successfully used for the extraction of quaternary alkaloids in Phellodendri chinensis cortex. The elution of target compounds was accomplished with sodium hexanesulfonate as the eluent solvent. A neutral ion pair was formed between ion-pairing reagent and positively charged alkaloids in this process, which was beneficial for selectively extraction of polar alkaloids. Several parameters were optimized and the optimal conditions were listed as follows: silica gel as the sorbent, silica to sample mass ratio of 1:1, the grinding time of 1 min. The exhaustive elution of targets was achieved by 200 µL methanol/water (9:1) containing 150 mM sodium hexane sulfonate at pH 4.5. The method validation covered linearity, recovery, precision of intraday and interday, limits of detection, limits of quantitation, and repeatability. This established method was rapid, simple, environmentally friendly, and highly sensitive.     

角锥棱镜谐振腔激光模式模拟研究

为了探究角锥棱镜谐振腔激光模式,以角锥-平面镜腔为例,将角锥棱镜等效为衍射光栅,考虑角锥镜棱宽在谐振腔中的衍射效应以及二面角误差引起的附加相位分布对谐振腔激光模式的影响,在光学谐振腔理论的基础上,建立了求解本征模式的理论分析模型.采用快速傅里叶法数值模拟不同腔长、角锥镜棱宽和二面角误差情况下该无源谐振腔激光输出模式分布情况.结果表明,在腔长30 cm、角锥镜棱宽小于75μm、二面角误差在-10′~5′之间时,可实现光斑完整的圆形分布输出模式,且有较好的光束质量;棱宽不小于0.4 mm,二面角误差在-40′~10′之间时,光斑为TEM 03阶横模,光场呈六瓣分布;当角锥镜棱宽为0.4 mm、二面角误差为3′,腔长从30~90 cm范围内增加时,该谐振腔输出的激光模式从TEM 03转换成TEM 10.